Fire Services

Commercial fire protection services in the GTA

Inspection, maintenance, installation, and reporting on every commercial fire system — CAN/ULC-S536:2019, NFPA 10 / 17A / 25, and the Ontario Fire Code — run by one accountable team.

contact us
Call (905) 495-6282

CAINtech runs the full Ontario Fire Code inspection cycle on commercial buildings — fire alarms (CAN/ULC-S536:2019), sprinklers (NFPA 25), extinguishers (NFPA 10), suppression systems (NFPA 17A / 12 / 2001), and emergency lighting (OFC Article 2.7.3.4). Five core services. One accountable team. CFAA-certified, NFPA 10 facility licensed, 427A sprinkler fitter qualified, authorized Siemens Cerberus PRO distributor.

5

Core fire services

24/7

Emergency response

Annual

OFC inspection cycle

CFAA

Certified technicians

Core services

Five core fire services

Fire alarm inspection

CFAA-certified inspection, testing, and repair under CAN/ULC-S536:2019 for commercial fire alarm systems across the GTA.

Learn more →

Fire extinguishers

Annual NFPA 10 maintenance, 6-year internal service, and hydrostatic testing for commercial extinguisher inventories.

Learn more →

Sprinkler systems

Licensed 427A sprinkler fitters performing the full NFPA 25 cycle on wet, dry, pre-action, and deluge systems.

Learn more →

Fire suppression

Semi-annual NFPA 17A kitchen suppression, NFPA 12 / 2001 clean agent service, and NFPA 20 / 25 fire pump testing.

Learn more →

Emergency lighting

Annual 30-minute duration testing with photometric verification under the Ontario Fire Code Article 2.7.3.4.

Learn more →

How we work

Four ways we serve commercial buildings

Inspection & Testing

CAN/ULC-S536, NFPA 25, NFPA 17A, NFPA 10, and Ontario Fire Code inspection cycles for every commercial fire system.

Maintenance & Repair

Same-visit deficiency repair where parts are in stock. 6-year NFPA 10 extinguisher internal maintenance.

Installation & Retrofit

Authorized Siemens Cerberus PRO panel installation. CAN/ULC-S537:2019 verification testing on new and modified systems.

24/7 Emergency Response

Round-the-clock response for fire alarm, sprinkler, and suppression faults. Call (905) 495-6282 anytime.

Standards & compliance

The codes we operate under

CAINtech operates under the Ontario Fire Code (O. Reg. 213/07, amended by O. Reg. 87/25), CAN/ULC-S536:2019 (inspection), CAN/ULC-S537:2019 (verification), CAN/ULC-S524 (installation), and the applicable NFPA standards: NFPA 10, NFPA 25, NFPA 17A, NFPA 12, NFPA 2001, NFPA 20. Emergency lighting follows Ontario Fire Code Article 2.7.3.4.

Reports submit in the exact AHJ-recognized format for each standard. Severity-classified deficiency log and photo evidence on every report.

Frequently asked questions

What is included in a full Ontario Fire Code inspection cycle?+
Annual fire alarm testing (CAN/ULC-S536:2019), quarterly and annual sprinkler service (NFPA 25), annual extinguisher service (NFPA 10), semi-annual suppression service (NFPA 17A for kitchens, NFPA 12 / 2001 for clean agent), and monthly and annual emergency lighting testing under the Ontario Fire Code Article 2.7.3.4.
Do you service multiple fire systems on the same visit?+
Yes. Most commercial buildings have several fire systems — alarm, sprinklers, extinguishers, suppression, emergency lighting. We coordinate the full annual cycle in one engagement instead of four separate contractor visits.
Are CAINtech technicians certified to inspect every fire system?+
Our technicians hold CFAA certification for fire alarm work, NFPA 10 facility licensing for extinguishers, Sprinkler Fitter 427A Red Seal qualification for sprinkler work, and manufacturer factory certifications including Siemens Cerberus PRO. A full credentials sheet is available to procurement teams on request.
How fast is the 24/7 emergency response?+
Our 24/7 line is for fire system faults: a panel trouble signal that needs investigating, a sprinkler-flow alarm triggering, suppression-system activation after an event. We respond same-day during business hours and dispatch within hours for after-hours emergencies in the GTA.
Can you handle fire-protection inspections for buildings outside the GTA?+
Our standard service area covers the GTA and surrounding regions — Peel, Toronto, York, Durham, Halton, Hamilton, Dufferin, and south Simcoe (Barrie to Oshawa to Hamilton). For larger projects we travel further across Ontario — contact us to discuss.
Do you provide reports suitable for AHJ submission?+
Yes. All inspection reports are submitted in the exact CAN/ULC-S536:2019 (fire alarm) and NFPA-format (sprinkler, suppression, extinguishers, emergency lighting) layouts your AHJ expects, with deficiency severity classifications and photo evidence.

Get a fire-protection quote

Send us your building address and which fire systems need service. Fixed-fee annual quote back the same business day.

contact us